HP Enterprise FlexFabric 12900E Series Command Reference Manual page 60

Syntax
display user-interface [ number1 | { aux | vty } number2 ] [ summary ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
: Specifies the absolute number of a user line. The value range is 0 to 159.
number1
: Specifies the AUX line.
aux
: Specifies the VTY line.
vty
: Specifies the relative number of a user line. The value range is 0 to 31 for AUX lines and
number2
0 to 127 for VTY lines.
: Displays summary information about user lines. If you do not specify this keyword, the
summary
detailed information is displayed.
Usage guidelines
This command is an older version reserved for backward compatibility purposes. It has the same
functionality and output as the
command.
line
Examples
# Display information about line 0.
<Sysname> display user-interface 0
Idx Type
F 0 AUX 0
+ : Line is active.
F : Line is active and in async mode.
Idx : Absolute index of line.
Type : Type and relative index of line.
Auth : Login authentication mode.
Int : Physical port of the line.
A : Authentication use AAA.
N : No authentication is required.
P : Password authentication.
Table 10 Command output
Field
Modem
Int
Location
display line
Tx/Rx Modem Auth
9600 -
Description
Whether the modem allows calling in or out. By default, this attribute is not configured and
this field displays a hyphen (-).
Physical port for the line. If there is no physical port for the line or the port is a console port,
this field displays a hyphen (-).
Physical position of the line, in the form of slot number/CPU number.
command. As a best practice, use the
Int Location
N - 1/0
54
display