HP Enterprise FlexFabric 12900E Series Command Reference Manual page 90

Default
A console user is assigned the network-admin user role. Other users are assigned the
network-operator user role.
Views
User line view
User line class view
Predefined user roles
network-admin
Parameters
role-name
can be user-defined or predefined. Available predefined user roles include network-admin,
network-operator, and level-0 to level-15. The predefined security-audit user role is not supported in
user line view or user line class view. If you do not specify this argument, the
command restores the default user role.
Usage guidelines
Only users assigned the network-admin, or level-15 user role can execute this command. Other
users cannot execute this command, even if they are granted the right to execute this command.
This command is available in both user line view and user line class view. A non-default setting in
either view takes precedence over a default setting in the other view. A non-default setting in user
line view takes precedence over a non-default setting in user line class view.
A user role change does not take effect on the current session. It takes effect on subsequent login
sessions.
You can assign up to 64 user roles to a user line.
For more information about user roles, see RBAC configuration in Fundamentals Configuration
Guide.
Examples
# Assign user role network-admin to AUX line 0.
<Sysname> system-view
[Sysname] line aux 0
[Sysname-line-aux0] user-role network-admin
: Specifies a user role name, a case-sensitive string of 1 to 63 characters. The user role
84
undo user-role