Display Startup - HP Enterprise FlexFabric 12900E Series Command Reference Manual

sysname Sysname
#
ftp server enable
#
telnet server enable
#
domain default enable system
#
vlan 1
#
domain system
#
---- More ----
Related commands
reset saved-configuration
save
save binary-only

display startup

Use
display startup
the device started up with and the files for next startup.
Syntax
display startup
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
The standby MPU always uses the same current startup configuration file as the active MPU.
After an active/standby switchover, it is normal that the current startup configuration files on both
MPUs are displayed as NULL. This is because the new active MPU continues to run with the running
configuration rather than rebooting with a startup configuration file.
Examples
# Display names of the startup configuration files.
<Sysname> display startup
MainBoard:
Current startup saved-configuration file: flash:/startup.cfg(*)
Next main startup saved-configuration file: flash:/startup.cfg
Next backup startup saved-configuration file: NULL
to display the names of all startup configuration files, including the file that
170