Feature - HP Enterprise FlexFabric 12900E Series Command Reference Manual

reset lacp *
debugging link-aggregation *
display debugging link-aggregation *
Feature: stp
display stp *
system-view ; stp *
system-view ; interface * ; stp *
system-view ; snmp-agent trap enable stp *
reset stp *
debugging stp *
...
# Display the feature list of the L3 feature group.
<Sysname> display role feature-group name L3
Feature group: L3
Feature: route
Feature: staticrt
Feature: ospf
Feature: rip
Feature: isis
Feature: lisp
Feature: bgp
Feature: l3vpn
Feature: route-policy
Related commands

feature

role feature-group
feature
Use
feature
Use
undo feature
Syntax
feature feature-name
undo feature feature-name
Default
A user-defined feature group does not have any features.
Views
Feature group view
Predefined user roles
network-admin
Parameters
feature-name
(W)
(STP related commands)
(R)
(W)
(W)
(W)
(Route management related commands)
(Unicast static route related commands)
(Open Shortest Path First protocol related commands)
(Routing Information Protocol related commands)
(ISIS protocol related commands)
(LISP protocol related commands)
(Border Gateway Protocol related commands)
(Layer 3 Virtual Private Network related commands)
(Routing Policy related commands)
to add a feature to a feature group.
to remove a feature from a feature group.
: Specifies a feature name. You must enter the feature name in lower case.
(W)
(R)
(W)
(W)
25