Display - HP Enterprise FlexFabric 12900E Series Command Reference Manual

display >>
Use
display >>
Syntax
display command >> filename
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
command : Specifies the keywords and arguments of a
keywords and arguments, enter
: Specifies the name of the file that is used to save the output, a string of 1 to 63
filename
characters.
Usage guidelines
The

display

display >>
If the specified file does not exist, the system creates the file and saves the output to the file. If the file
already exists, the system appends the output to the end of the file.
Examples
# Append the VLAN 999 settings to the end of the vlan.txt file.
<Sysname> display vlan 999 >> vlan.txt
<Sysname>
# Check the content of the vlan.txt file.
<Sysname> more vlan.txt
VLAN ID: 1
VLAN type: Static
Route interface: Not configured
Description: VLAN 0001
Name: VLAN 0001
Tagged ports:
Untagged ports:
HundredGigE1/0/2
VLAN ID: 999
VLAN type: Static
Route interface: Configured
IPv4 address: 192.168.2.1
IPv4 subnet mask: 255.255.255.0
Description: For LAN Access
Name: VLAN 0999
Tagged ports:
Untagged ports:
to append the output from a
display ?
commands show the configuration, statistics, and states of the device. You can use
to save the output to a file.
None
None
command to the end of a file.
display
display
.
5
command. To display available