HP Enterprise FlexFabric 12900E Series Command Reference Manual page 129

Hide thumbs Also See for Enterprise FlexFabric 12900E Series:
Table of Contents

Advertisement

ip source-ip-address
transmission, make sure this address is the IPv4 address of an interface in up state on the
device.
-d
: Enables TFTP client debugging. By default, TFTP client debugging is disabled.
Usage guidelines
The source address specified with the
specified with the
The source address specified with the
connections. The source address specified with the
TFTP connection.
Examples
# Download the new.bin file from TFTP server 192.168.1.1 and save the file as new.bin.
<Sysname> tftp 192.168.1.1 get new.bin
Press CTRL+C to abort.
% Total
100
183
100
183
Table 19 Command output
Field
%
Total
%
Received
%
Xferd
Average Dload
Speed Upload
Table 20 TFTP client debugging information
Field
TFTP_STATE_START
File not found
Internal error clearing splay node
Internal error Unexpected packet
STATE: INIT =>
STATE: CONNECT =>
STATE: WAITCONNECT =>
STATE: SENDPROTOCONNECT
=>
: Specifies an IPv4 address. For successful TFTP packet
tftp client source
% Received % Xferd
100
183
0
100
183
0
command takes precedence over the source address
tftp
command.
tftp client source
tftp
Average Speed
Dload
Upload
0
640
0 --:--:-- --:--:-- --:--:--
0
629
0 --:--:-- --:--:-- --:--:--
Description
Percentage of file transmission progress.
Size of files to be transmitted, in bytes.
Percentage of received file size to total file size.
Received file size, in bytes.
Percentage of sent file size to total file size.
Sent file size, in bytes.
Average download speed, in bps.
Average upload speed, in bps.
Description
TFTP service started.
The destination file was not found.
An internal error occurred while the system was clearing a splay
node.
An unexpected packet was received.
The system was performing the initialization.
The system was trying to establish the connection.
The system was waiting for the connection response.
The system started a protocol connection.
123
command applies to all TFTP
command applies only to the current
Time
Time
Time
Total
Spent
Left
Current
Speed
1830
629

Advertisement

Table of Contents
loading

Table of Contents