HP Enterprise FlexFabric 12900E Series Command Reference Manual page 106

Views
User view
Predefined user roles
network-admin
Parameters
ftp-server
case-insensitive string of 1 to 253 characters. Valid characters for a host name include letters, digits,
hyphens (-), underscores (_), and dots (.).
service-port
default is 21.
vpn-instance vpn-instance-name
server belongs. The
characters. If the FTP server belongs to the public network, do not specify this option.
dscp dscp-value
the packet transmission priority. The value range is 0 to 63. The default is 0.
source
source-ip-address }
•
interface interface-type interface-number
number. The device will use the interface's primary IPv4 address as the source address. To
establish the FTP connection successfully, make sure the interface is up and has the primary
IPv4 address configured.
•
ip source-ip-address
successfully, make sure this address is the IPv4 address of an interface in up state on the
device.
: Enables FTP client debugging.
-d
Usage guidelines
This command is only applicable to IPv4 networks.
If no parameters are specified, this command enters the FTP client view without logging in to an FTP
server.
If the server parameters are specified, you are prompted to enter the username and password for
logging in to the FTP server.
Examples
# Log in to FTP server 192.168.0.211. Use 192.168.0.212 as the source IPv4 address for outgoing
FTP packets.
<Sysname>ftp 192.168.0.211 source ip 192.168.0.212
Press CTRL+C to abort.
Connected to 192.168.0.211 (192.168.0.211).
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User (192.168.0.211:(none)): abc
331 Give me your password, please
Password:
230 Logged in successfully
Remote system type is MSDOS.
ftp>
# Log in to FTP server 192.168.0.211 and enable FTP client debugging.
<Sysname> ftp 192.168.0.211 –d
: Specifies the IPv4 address or host name of an FTP server. A host name can be a
: Specifies the TCP port number of the FTP server, in the range of 0 to 65535. The
vpn-instance-name
: Specifies the DSCP value for IPv4 to use in outgoing FTP packets to indicate
{ interface
: Specifies the source address used to establish the FTP connection.
: Specifies an IPv4 address. To establish the FTP connection
: Specifies the MPLS L3VPN instance to which the FTP
argument is a case-sensitive string of 1 to 31
interface-type
100
interface-number
: Specifies an interface by its type and
| ip