IBM eServer xSeries 445 Type 8870 Option Installation Manual page 78

RXE Expansion Port B
Figure 70. RXE Expansion port cabling a server with two SMP Expansion Modules
3. Connect the opposite end of the cable to an RXE Expansion Port on the
4. Using an RXE Management cable, connect one end of the cable to the RXE
RXE Management
Figure 71. Cabling RXE Management Port - one server
5. Connect the opposite end of the cable to the RXE Management A (in) Port on
6. Connect all remaining external cables to the server.
66
xSeries 445 Type 8870: Option Installation Guide
RXE Expansion Port A
RXE-100 enclosure.
Notes:
a. When two SMP Expansion Modules are installed, both of the RXE
Expansion ports are active.
b. To increase reliability, connect a second cable from RXE Expansion Port A
on the server to RXE Expansion Port B on the enclosure. This will create a
redundant data path if either of the two cables fail.
Management Port on the server.
RXE Management Port
A (in) Port
the RXE-100 enclosure.
xSeries 445
RXE-100
xSeries 445
RXE-100