IBM eServer xSeries 445 Type 8870 Option Installation Manual page 77

RXE Management Port
RXE Management A (in) Port
Figure 68. Cabling RXE Management Port - one server
5. Connect the opposite end of the cable to the RXE Management A (in) Port on
the RXE-100 enclosure.
6. Connect all remaining external cables to the server.
RXE Expansion Port cabling for one server with two SMP
Expansion Modules
If your server has two SMP Expansion Modules installed, complete the following
steps to connect an RXE-100 enclosure:
1. Remove the protective covers from the connectors on the ends of the cables.
Protective cover
Figure 69. RXE Expansion cable with protective cover
2. Using an RXE Expansion cable, connect one end of the cable to RXE
Expansion Port B on the server.
xSeries 445
RXE-100
Chapter 2. Installing options
65