IBM eServer xSeries 445 Type 8870 Option Installation Manual page 30

2. Remove the front bezel (see "Removing and replacing the bezel" on page 16).
3. Press the release latch; then, lift the handle on the power supply to the open
Release latch
Figure 13. Removing a power supply
4. Install the new power supply:
Release latch
Figure 14. Installing a power supply
18
xSeries 445 Type 8870: Option Installation Guide
position and remove the power supply.
Hot-swap
power supply
Power supply handle
(in open position)
Hot-swap
power supply
Power supply handle
(in open position)
AC LED
DC LED
AC LED
DC LED