IBM eServer xSeries 445 Type 8870 Option Installation Manual page 69

3. Before connecting RXE or SMP Expansion cables to the server, ensure that the
protective cover is removed from the connectors on each end.
4. See the following illustrations to locate the connectors on the back of your
server, depending on your model. The illustrations in this document might differ
slightly from your hardware.
System power System power
connector 1 connector 2
SMP Expansion Port 1
SMP Expansion Port 2
SMP Expansion Port 3
SCSI connector
RXE Management Port
Figure 56. Rear view of Remote Supervisor Adapter II-EXA model
System power System power
connector 1 connector 2
SMP Expansion Port 1
SMP Expansion Port 2
SMP Expansion Port 3
SCSI connector
RXE Management Port
Figure 57. Rear view of Remote Supervisor Adapter model
5. If your server model comes with an operating system, such as Microsoft
®
Windows 2000 Datacenter Server or VMware ESX server, see the software
documentation provided with your software for additional cabling instructions.
RXE Expansion Port B
Mouse connector
Keyboard connector
Video connector
USB 1
(not supported)
USB 2
RXE Expansion Port B
Mouse connector
Keyboard connector
USB 1
USB 2
Video connector
Remote
Supervisor
Adapter II - EXA
connectors
and LEDs
Gigabit Ethernet
connector
Upper Ethernet
status LED
Lower Ethernet
status LED
Gigabit Ethernet
connector
RXE Expansion
Port (A)
Remote
Supervisor
Adapter
connectors
and LEDs
Gigabit Ethernet
connector
Upper Ethernet
status LED
Lower Ethernet
status LED
Gigabit Ethernet
connector
RXE Expansion
Port (A)
®
Chapter 2. Installing options
57