IBM eServer xSeries 445 Type 8870 Option Installation Manual page 67

Figure 53. Removing the battery
6. Insert the new battery:
a. Position the battery so that the positive (+) symbol is facing away from you.
b. Use one finger to press the top of the battery clip away from the battery.
c. Press the battery into the socket until it clicks into place. Make sure that
the battery clip holds the battery securely.
Figure 54. Installing the battery
7. Install fans 3 and 4 in the server (see "Replacing fans 3 and 4" on page 21 for
details).
8. Close the server cover, and connect the cables.
9. Slide the server into the rack enclosure until it stops; then, secure the server in
the rack enclosure using the quick release latches.
10. Turn on the server.
11. Start the Configuration/Setup Utility program and set configuration parameters.
v Set the system date and time.
v Set the power-on password.
v Reconfigure your server.
Chapter 2. Installing options
55