IBM eServer xSeries 445 Type 8870 Option Installation Manual page 38

Connect to
SCSI backplane
Figure 20. Location of preinstalled SCSI cable
Figure 21. Connecting the SCSI cable to the SCSI backplane
10. Close the cover on the server; then, reinstall the server in the rack and
11. Turn on the server.
26
xSeries 445 Type 8870: Option Installation Guide
6. Locate one end of the preinstalled SCSI cable and connect it to the
ServeRAID adapter.
Preinstalled
SCSI cable
7. Locate the other end of the preinstalled SCSI cable and connect it to the SCSI
backplane connector.
Front of server
SCSI backplane
connector
8. Reinstall fans 3 and 4.
9. If you have other options to install or remove, do so now.
connect all external cables.
Connect to
ServeRAID adapter