Lift The Router Into The Rack - Juniper MX960 Quick Start Manual

MX960 Ethernet Services Router Quick Start

Lift the Router into the Rack

Lifting the chassis and mounting it in a rack requires three people. The empty chassis
weighs approximately 150 lb (60.4 kg).
1.
2.
3.
4.
5.
6.
12
Step 3: Install the Router
Ensure the rack is in its permanent location and is secured to the building.
Position the router in front of the rack or cabinet, centering it in front of the
mounting shelves. Use a pallet jack if one is available.
With one person on each side and one person in the front, hold onto the bottom
of the chassis and carefully lift it onto the large and small (if installed) mounting
shelves.
Slide the router onto the mounting shelves until the mounting brackets or
front-mounting flanges contact the rack rails. The shelves ensure that the holes
in the mounting brackets and the front-mounting flanges of the chassis align
with the holes in the rack rails.
To install the router in an open-frame rack, install a mounting screw into each
of the open mounting holes aligned with the rack, starting from the bottom.
Visually inspect the alignment of the router. If the router is installed properly in
the rack, all the mounting screws on one side of the rack should be aligned with
the mounting screws on the opposite side and the router should be level.