Sharp AR-M350N Service Manual page 229

Name
Telnet Web page
Login Password Login Password Login Password No (No password)
Job Polling Job Polling
(sec) interval (sec)
Bindary Mode Bindary Mode
FSERVER File server
Name 1 – 8 name 1 – 8
NDS Tree NDS Tree name NDS Tree name ""
NDS Context NDS Context
PSERVER Print Server
Name 1 – 8 name 1 – 8
Job Timeout Job Timeout
(sec) (sec)
D. AppleTalk and related items
Name
Telnet Web page
AppleTalk AppleTalk
Protocol Protocol
Zone Name Zone Name
Printer Name Printer Name
E. NetBEUI and related items
Name
Telnet Web page
NetBEUI NetBEUI
Protocol Protocol
Computer Computer
Name Name
Work Group Work Group
Comment Comment
Factory setup
NIC Manager
Job Polling 4
interval
Bindary setup ENABLE
Filer server ""
name to be
connected
NDS Context ""
Print Server ""
name to be
connected
Job Timeout 10
Factory setup
NIC Manager
Use AppleTalk ENABLE
Protocol.
Zone Name "*"
Printer Name "SCxxxxxx" (xxxxxx is
the lower 6 digits of
Mac address.)
Factory setup
NIC Manager
Use NetBEUI ENABLE
Protocol.
Computer name "SCxxxxxx" (xxxxxx is
the lower 6 digits of
Mac address.)
Work Group "Sharp-Printer"
Comment "Sharp AR-NC5J"
AR-NC5J/NC5JG/NC5JW - 5
Descriptions
Used to set the password authenticated when the AR-NC5J logs in
the file server as a print server. The password can be set in max. 31
characters. However, it is not recommendable to use Chinese
characters and Katakana character in a password. When a password
is set for the AR-NC5J, the same password must be set to the
corresponding file server. (Setup of a password on the file server is
made from "Print server information.") When connecting to two or
more file servers, the same password must be set to all of them.
*Note: The AR-NC5J uses a null character array for the default
password. That is, even though a password is set to the AR-NC5J and
no password is set to the print server information (a null character
array is set), connection and printing are allowed. This, however, is an
exceptional process. In the normal process, the password set to the
AR-NC5J must be identical to that for the print server information.
Used to specify the time interval (sec) between job inquiries from the
AR-NC5J to the filer server. Normally there is no need to change the
default setup, 4sec.
Used to disable/enable the bindary mode operation. When disabled,
only the NDS mode operation is valid. This is set to DISABLE only
when only the NDS mode is used.
Used to set the priority file server name with max. 31 characters.
When operating in the print server mode, the file server specified in
this setup is logged in. If this setup is empty, the AR-NC5J
automatically retrieves a file server to log in.
Used to set the NDS tree to be connected. Since it is automatically
acquired, there is no need to set in normal cases. If there are two or
more trees in a network, it must be set.
Used to set the NDS context connected in the print server mode. In
this item, the context which formed the print server on the file server is
set.
Used to set the print server name to be connected in priority. When
operating in the remote printer mode, connection is made to the print
server set in this setup. If this setup is empty, the AR-NC5J
automatically retrieves a print server to connect.
Used to set the timeout for the AR-NC5J to judge the completion of a
job when operating in the remote printer mode. Usually the default
value is used.
Descriptions
Used to disable/enable the AppleTalk protocol operation.
Used to set the zone name which the AR-NC5J belongs to. If this
setup is "*", The AR-NC5J belongs to the default zone set in the
AppleTalk router in the network.
Used to set the AppleTalk printer name. The set printer name is visible
from the selector. The special codes (=:@*) of the AppleTalk protocol
cannot be used in this character array.
Descriptions
Used to disable/enable the NetBEUI protocol operation.
Used to set the computer name. The set name is displayed in
Window's Explorer. The name must be different from the other
computer names.
Used to set the work group which the AR-NC5J belongs to. Use the
default work group name or an existing work group name. A new work
group name which does not exist in the network cannot be displayed
as a work group.
Used to set the comment on the AR-NC5J. The set contents are
displayed as the comment on the AR-NC5J by Window's Explorer.