Table of Contents
Advertisement
Menu
SIZE adjstment X
SIZE adjustment .
Used to perform the size detection adjustment of the optional universal tray and the manual feed tray.
(LCD display)
*Using [
Pressing [OK] key enter the adjustment mode.
(Selectable modes)
<select A>
1. Widen the guide to the MAXIMUM position.
*Pressing [OK] key starts the adjustment.
2.Narrow the guide to the MINIMUM position.
*Pressing [OK] key starts the adjustment.
*Pressing [BACK/C] key terminates the setting.
<select B>
*Pressing [OK] key displays the adjustment value.
*Using [
*Pressing [OK] key set the changes of the value, and moves to the next mode
*Pressing [BACK/C] key terminates the setting.
<select C>
1. Widen the guide to the MAXIMUM position.
*Pressing [OK] key starts the adjustment.
2.Guide to the P1 position.
*Pressing [OK] key starts the adjustment.
3.Guide to the P2 position.
*Pressing [OK] key starts the adjustment.
4.Narrow the guide to the MINIMUM position.
*Pressing [OK] key starts the adjustment.
*Pressing [BACK/C] key terminates the setting.
ICU PRINT MODE SET Icu print mode setting.
*Press [OK] key to start the setup mode.
*Press [MENU] key to shift to the next item.
*Pressing [MENU] moves to the next item
*Using [
*Pressing [BACK/C] key releases the print mode set.
*Pressing [OK] key starts the print mode set.
*DATA ( LED) blinks during the print mode set execution.
SIZE ADJUSTMENT X
] or [
] key select the tray.
X:
A:
B:
C:
] and [
] keys changes the value.
ICU PRINT MODE SET
] and [
] keys changes the mode.
AR-P350 DIAG-13
Content
A3 Universal tray adjustment
Bypass tray setting
Bypass tray adjustment
Initial
Set range
value
Advertisement
Table of Contents
