Table of Contents
Advertisement
Menu
DESTINATION SETUP Destination setup.
Used to perform the destination setup.
(LCD display)
*Pressing the [
*Pressing [OK] key displays the destination.
*Using [
*Pressing [OK] key set the change of the destination.
*Pressing [BACK/C] key terminates the setting.
TRAY DETECT
Tray detect type setting.
TYPE xx
Used to select between the AB series and the inch series for size detection of each paper feed tray.
(LCD display)
*Pressing the [
*Pressing [OK] key displays the destination.
*Using [
*Pressing [OK] key set the change of the destination.
*Pressing [BACK/C] key terminates the setting.
CE MARK SETTING
CE mark setting.
Used to set the operation mode conforming to the CE mark.
(LCD display)
*Pressing [OK] key start the setting.
*Using [
*Pressing [OK] key memorize the CE mark mode.
*Pressing [BACK/C] key terminates the setting.
COUNTUP MODE
countup mode setup.
SETUP
1.Used to set the count-up mode of A3 (11 x 17) paper.
2.Used to set whether to perform count-up of blank paper.
(LCD display)
*Pressing the [
*Pressing [OK] key start the setting.
*Using [
*Pressing [OK] key memorize the countup number.
*Pressing [BACK/C] key terminates the setting.
DESTINATION SETUP
] or [
] key select the destination.
] and [
] keys changes the destination.
64); ,-6-+6 6;2- :::
] or [
] key select the tray.
] and [
] keys changes the destination.
XX:
M:
T2:
T3:
T4:
CE MARK SETTING
] and [
] keys changes the YES or NO.
COUNTUP MODE SETUP X
] or [
] key select the counter mode.
] and [
] keys changes the countup number.
X:
A:
B:
C:
D:
AR-P350 DIAG-18
Content
MFT
A3 Universal tray
Desk tray1
Desk tray2
total counter A3(11X17) countup mode.
mainte counter A3(11X17) countup mode.
deve counter A3(11X17) countup mode.
blank paper countup mode.
Initial
Set range
value
Set
value
AB
INCH
Set
value
YES
NO
A ~ C
Set
value
SINGLE
DOU-
BLE
D
Set
value
NO
(NO-
COUNT
UP)
YES
(COU-
NT UP)
Advertisement
Table of Contents
