Table of Contents
Advertisement
B. Installation of paper feed options to the machine
Note: Before use of this machine, one of the paper feed option units
(AR-D13/AR-D14/AR-MU1) should be installed to the machine for
safety reasons.
Refer to the drawing of the AR-MU1 in this manual.
1) Put the machine on the previously installed option unit.
Be sure to check that the boss of the option unit is securely engaged
with the machine and that the external lines (front and left sides) of
the option unit and those of the machine are aligned completely.
2) Connect the machine with the option unit.
Mounting plate R
Mounting
plate F
Fixing screw
3) Install the option power source (AR-DC1).
*
For necessity of installation, refer to the option combination.
*
For the installing procedure, refer to the AR-DC1 Service Manual.
Mounting plate R
Fixing screw
Mounting plate F
Fixing screw
AR-P350 UNPACKING AND INSTALLATION-3
C. Setting related to process
1) Open he left door and the front door.
2) Remove the developer cartridge from the machine.
3) Remove the top cover of the developer cartridge.
Advertisement
Table of Contents
