Sharp AR-M350N Service Manual page 178

Menu
WARM UP TIME Warm up time display mode.
DISPLAY Used to display the warm-up time.
(LCD display)
*Pressing [OK] key enter the Warm up time display mode.
*Pressing [BACK/C] key terminates the Warm up time display mode.
COUNTER DATA Counter data display.
DISPLAY Used to display each counter value.
(LCD display)
*Pressing the [
*Pressing [OK] key displays the counter value.
*Using [MENU] moves to the next item.
*Pressing [BACK/C] key terminates the Counter Display Mode.
COUNTER DISP XXXX::
COUNTER DISP .
TOTAL
DRUM
TONER
DEVE
MAINTE
TOTAL
OUTPUT
STAPLE COUTNER DISP .
STAPLE
PUNCH
FEED COUNTER DISP.
TRAY1
TRAY2
LCC1/TRAY3 Paper feed tray 3 counter
LCC2/TRAY4 LCC2
MFT
ADJ
Content
WARM UP TIME DISPLAY
COUNTER DISPLAY
] or [ ] key selects the counter group for the counter display mode.
PROCESS COUNTER DISP.
Total print quantity DRUM
Drum counter TONER
Toner counter DEVE
Developing counter MAINTE
Maintenance counter DRUM MOTOR TIME Drum motor drive time
Copy counter DV MOTOR TIME
(Effective paper counter)
PROCESS WAY
Staple counter DESTINATION
Punch counter
Paper feed tray 1 counter
Paper feed tray 2 counter
or paper feed tray 4 counter
Manual paper feed counter
Duplex counter
AR-P350 DIAG-16
Drum counter
Toner counter
Developing counter
Maintenance counter
Developing motor drive time
Process system
Destination
Initial
Set range
value