Unit And Connection Data - Henny Penny FlexFusion FPE-615 Installation Manual

Description of the unit

3.3 Unit and connection data

INFORMATION
Size
Dimensions
Unit
Length x Width x Height (mm
(in))
Weight
Unit ≈ (kg (lb))
Emissions
Noise level (db(A))
Steam output (g/h (oz/h))
Steam output (m³/h (cuft/h))
Latent heat dissipation (W)
Sensible heat dissipation (W)
The sensible and latent heat amounts are determined in Germany on the basis of VDI 2052 at a connection voltage of
400 V. The applicable regional regulations may vary from this.
Operating environment
Temperature (°C (°F))
Relative humidity (%)
non-condensing
Electrical connection
Protective system
Type of connection
Voltage (V)
Connected load (kW)
Fuse (A)
Voltage (V)
Connected load (kW)
Fuse (A)
Voltage (V)
Connected load (kW)
12
• All voltages listed below are technically available.
• For some voltages, however, the implementation must be agreed with the
manufacturer.
• The voltage for which the device is designed is indicated on the nameplate.
615 621
997 (39,25) x 799 (31,46) x 989 (38,94)
129 (284,4) 134 (295,5)
< 70
2760 (97,35) 5540 (195,41)
4,7 (165,9) 9,4 (331,7)
1872 3762
1248 2508
5 (41 ) — 40 (104 )
95
IPX5
3PE / AC 50/60Hz, 3NPE / AC 50/60Hz
200
10.1 16.3
3 x 35 3 x 50
208
10.2 17.4
3 x 35 3 x 50
220
11.6 19.7
Installation instructions
115 121
997 (39,25) x 799 (31,46) x 1259 (49,57)
149 (328,5) 154 (339,6)
4210 (148,5) 8080 (285,01)
7,1 (250,5) 13,7 (483,4)
2862 5490
1908 3660
14.7 25.5
3 x 50 3 x 80
15.7 27.3
3 x 50 3 x 80
17.7 30.8