Henny Penny FlexFusion FPE-615 Installation Manual page 35

Connecting the unit
a b
a Transformer b Power pack
Currently, the devices are equipped with a transformer or a power
supply, depending on availability.
The adjustment of the supply voltage described below may only be
necessary for devices with a transformer.
No adjustment is necessary for devices with a power supply unit.
The unit is set to a specific supply voltage or voltage range when
delivered.
If the on-site supply voltage deviates from the preset supply voltage,
the device may be damaged.
Before connecting the device, the supply voltage must be measured
and the transformers located in the device must be checked and
reconnected if necessary.
A B
X1
X2
T1
Image: A Transformer T1 location; B Transformer connections for control system
Installation instructions 35