Table of Contents
Advertisement
Occupant safety
64
Mercedes‑Maybach vehicles
If necessary, slide head restraint
#
(
page 110).
/
Remove cover
2
of Top Tether anchorage
#
3.
Install the LATCH-type (ISOFIX) or belt-
#
secured child restraint system with Top Tether.
In doing so, comply with the child restraint
system manufacturer's installation instruc-
tions.
Guide Top Tether belt
#
1
between the two head restraint bars.
Hook Top Tether hook
#
4
into Top Tether anchorage
1
upwards
twisting.
Tension Top Tether belt 4. In doing so, com-
#
ply with the child restraint system manufactur-
er's installation instructions.
If necessary, slide head restraint
#
wards (
page 110). Make sure that you do
/
not interfere with the correct routing of Top
Tether belt 4.
Securing the child restraint system with the seat
belt
Securing a child restraint system on the rear seat
with the seat belt
& WARNING Risk of accident if the rear
bench seat, rear seat and seat backrest
are not engaged
The rear bench seat, rear seat and seat back-
4
under head restraint
rest may fold forwards, even when you are
driving.
5
of Top Tether belt
As a result, the vehicle occupant will be
R
3
without
pushed into the seat belt with increased
force. The seat belt will not be able to pro-
tect as intended and could cause addi-
tional injury.
Objects or loads in the trunk or cargo
R
compartment will not be restrained by the
1
down-
seat backrest.
Advertisement
Table of Contents
