Table of Contents
Advertisement
The vehicle is on solid, non-slippery and level
R
ground.
The required tire-change tool kit is available.
R
%
If your vehicle is not equipped with the tire-
change tool kit, consult a qualified specialist
workshop to find out about suitable tools.
Apply the electric parking brake manually.
#
Move the front wheels to the straight-ahead
#
position.
Shift the transmission to position j.
#
Vehicles with level control system: Set the
#
normal vehicle level (
page 250).
/
Switch off the vehicle.
#
Make sure that the vehicle cannot be started.
#
Place chocks or other suitable items under the
#
front and rear of the wheel that is diagonally
opposite the wheel you wish to change.
Raise the vehicle (
page 398).
/
#
Additionally, for Mercedes-Maybach vehicles:
Retract the running boards (
page 79)
/
#
To remove stone chipping protective covers
#
2:
Loosen expansion rivet
1
and pull it out.
#
Fold down and remove stone chipping protec-
#
tive covers 2.
Wheels and tires 397
Removing and installing the wheel trim/hub caps
Requirements:
The vehicle is prepared for a wheel change
R
(
page 396).
/
Plastic hub cap
To remove: turn the center cover of the hub
#
cap counter-clockwise and remove the hub
cap.
To install: make sure that the center cover of
#
the hub cap is turned counter-clockwise.
Position the hub cap and turn the center cover
#
clockwise until the hub cap engages physically
and audibly.
Advertisement
Table of Contents
