Table of Contents
Advertisement
108 Seats and stowing
row of seats and hold it down until the rear
seat audibly engages.
The rear seat will tip downwards and move
back. The seat backrests and head restraint
will then move into a suitable seat position
automatically.
If a seat on the second row of seats is not
engaged, this will be shown on the multifunc-
tion display on the instrument cluster.
To interrupt the folding procedure before
#
engagement, let go of button 1. To continue
the folding procedure, press and hold button
1
again.
Folding the rear seats forwards mechanically
(emergency release)
You can also fold the rear seats forwards mechan-
ically using release loops. The release loops are
located on the outer sides and rear sides of the
seats on the second row of seats.
Release loops on the second row of seats
Release loops on the rear sides of the second row of
seats
Pull one of release loops 1.
#
Fold the seat backrest forwards.
#
Before commencing your journey, make sure
#
that the seat backrest and the rear bench seat
are engaged.
Head restraints
Adjusting the front seat head restraints manually
& WARNING Risk of accident due to adjust-
ing the vehicle settings while the vehicle is
in motion
You could lose control of the vehicle in the fol-
lowing situations in particular:
If you adjust the driver's seat, the head
R
restraint, the steering wheel or the mirror
while the vehicle is in motion
If you fasten your seat belt while the vehi-
R
cle is in motion
Before starting the engine: In particular,
#
adjust the driver's seat, head restraint,
Advertisement
Table of Contents
