Table of Contents
Advertisement
The vehicle requires an automatic engine
R
start.
You release the brake pedal.
R
Vehicles with a 48 V on-board electrical sys-
R
tem:
You release the brake pedal on a downhill
-
gradient and the vehicle does not roll.
The vehicle rolls on a downhill gradient and
-
does not automatically enter glide mode at
15 mph (20 km/h).
ECO start/stop function symbols on the instru-
ment display:
The è symbol (green) appears when the
R
vehicle is at a standstill: the engine was
switched off by the ECO start/stop function.
The ç symbol (yellow) appears when the
R
vehicle is at a standstill: not all vehicle condi-
tions for an engine stop have been met.
Neither the è symbol nor the ç symbol
R
appears when the vehicle is at a standstill: an
intelligent stop inhibitor, e.g. a stop sign, has
been detected.
The s symbol appears: the ECO start/stop
R
function is deactivated or there is a malfunc-
tion.
If the engine was switched off by the ECO start/
stop function and you leave the vehicle, a warning
tone will sound and the engine will not be restar-
ted. In addition, the following display message will
appear on the instrument display:
Vehicle Ready to Drive Switch the Ignition Off
Before Exiting
If you do not switch off the vehicle, it will automat-
ically be switched off after three minutes.
Driving and parking 187
Switching the ECO start/stop function on/off
Press button 1.
#
A display will appear on the instrument cluster
when you switch the ECO start/stop function
on/off.
%
s will be continuously shown on the
instrument cluster while the ECO start/stop
function is deactivated.
Advertisement
Table of Contents
