Table of Contents
Advertisement
158 Light and visibility
Switching the rear window wiper on/off
1
ô Single wipe/washing
2
è Intermittent wiping
Single wipe: press button
1
as far as the
#
point of resistance.
Wiping with washer fluid: press button
#
beyond the point of resistance.
Switching intermittent wiping on/off: press
#
button 2.
Vehicles with rain sensor: the wipe interval
automatically adapts to the driving conditions.
The è symbol will appear on the instru-
ment display when the rear window wiper is
switched on.
Replacing the windshield wiper blades
& WARNING Risk of becoming trapped if the
windshield wipers are switched on while
wiper blades are being replaced
If the windshield wipers begin to move while
you are changing the wiper blades, you can be
trapped by the wiper arm.
Always switch off the windshield wipers
#
and vehicle before changing the wiper
blades.
1
Moving the wiper arms into the replacement posi-
tion
Switch the vehicle on and then off again
#
immediately.
Within around 15 seconds, press and hold the
#
î button on the combination switch for
approximately three seconds (
/
The wiper arms will move into the replacement
position.
Removing the wiper blades
Fold the wiper arms away from the windshield.
#
page 157).
Advertisement
Table of Contents
