Table of Contents
Advertisement
192 Driving and parking
Within the reset display if the previously
R
active drive program is unsuitable for the
transport of a roof load
For further information on the reset dis-
play, see (
page 192).
/
Selecting the drive program
Push DYNAMIC SELECT switch
1
#
backwards.
The drive program selected will appear on the
instrument display.
Configuring DYNAMIC SELECT (multimedia sys-
tem)
Multimedia system:
©
Settings
Vehicle
4
5
5
DYNAMIC SELECT
5
Setting drive program I
Select
Individual
Configuration.
#
Select and set a category.
#
Switching the reset display on or off
Switch
Request at Start
on or off .
#
Function on: the next time the vehicle is started a
prompt appears asking whether the last active
drive program should be restored. If the ECO
start/stop function was deactivated, an additional
prompt appears asking if the function should
remain deactivated.
forwards or
%
The prompt appears only if the previously
active settings deviate from the standard set-
tings.
Function off: the next time the vehicle is started
the A drive program is set automatically. The
ECO start/stop function is activated automati-
cally.
%
This function must be activated for each user
profile separately. Only when this function is
activated will the drive program and ECO
start/stop setting for the previous journey be
saved for the respective user profile.
Displaying vehicle data
Multimedia system:
©
Info
4
5
Select Vehicle.
#
The vehicle data is displayed.
Advertisement
Table of Contents
