Table of Contents
Advertisement
Setting automatic seat adjustment
& WARNING Risk of becoming trapped dur-
ing adjustment of the driver's seat after
calling up a driver profile
Selecting a user profile may trigger an adjust-
ment of the driver's seat to the position saved
under the user profile. You or other vehicle
occupants could be injured in the process.
Make sure that when the position of driv-
#
er's seat is being adjusted using the mul-
timedia system, no people or body parts
are in the seat's range of movement.
If there is a risk of someone becoming trap-
ped, stop the adjustment process immedi-
ately:
a) Tap the warning message on the
#
media display.
or
b) Press a memory position button or a
#
seat adjustment switch on the driver's
door.
The adjustment process will be stopped.
Requirements
Adapting the driver's seat and steering wheel
R
position to body size: automatic seat adjust-
ment has been switched on.
Multimedia system:
©
Settings
Vehicle
4
5
5
Automatic Seat Adjustment
5
Switching automatic seat adjustment on/off
When the active user profile is changed while the
vehicle is stationary, the driver's seat, steering
wheel, outside mirrors and seat contour will auto-
matically be adapted to the driver.
Select
On
or Off.
#
%
This setting is available only for individual user
profiles. For the guest profile, automatic seat
adjustment cannot be switched on or off.
Adjusting driver's seat and steering wheel position
to body size
The vehicle calculates a suitable driver's seat and
steering wheel position on the basis of the driver's
body size and sets this directly.
Seats and stowing 113
To set the unit of measurement: select
#
ft/in.
Set the size using the scale.
#
Start
Positioning.
Select
#
The driver's seat and steering wheel position
is adjusted to the body size that has been set.
%
If the driver's seat and steering wheel position
calculated by the vehicle is not practical or
comfortable, it can be manually changed at
any time via the buttons.
The exterior mirrors are not set via this func-
tion. Instead, they have to be set manually via
the switches.
%
You can also configure these settings via the
Mercedes me portal for your user profile. By
synchronizing the profiles in the vehicle and
the Mercedes me connect profiles, you can
carry over these settings for your vehicle.
Setting the easy entry and exit feature
Select
Steering Wheel &
Seat,
Steering
#
Wheel Only
or Off.
cm
or
Advertisement
Table of Contents
