Canon CN8x15 Operation Manual page 54

3. Operation in Basic Mode
Iris Compensation ON/OFF
The amount of light decreases when an extender (1.5×) is used. Therefore, you can set a function that corrects the iris to
the open side so as to maintain the amount of light.
Initial Top Screen
IG: 50
MENU
[Adj]
Fr1P
A
[Trk]OFF
Shtl
A 1
Fr1P
[I-Tq]H
A 2
Iris Screen
[ ]
Iris
[ I-Gain ]
Torque: High
Comp: ON
[ ]
Iris
Torque: High
Comp: ON
Close: OFF
[ ]
Iris
Torque: High
Comp: OFF
Controller OFF
Options
Description Iris compensation
(D): Default value
MENU
1
Press
The display switches to the Iris screen.
2
Press
[Comp] is underlined.
The previous or default function is
highlighted.
3 Press
Press left or right to switch the function
{ON} or {OFF}.
(D)
ON OFF
No iris compensation
Iris
× 3
once and three times.
three times.
or .
[ ]
× 3
E52
*: Displayed when {Comp} is set to ON.
Note: The iris may not fully close
in some cases when the iris
compensation is set to ON
while an extender (1.5×) is
used. If so, activate detection
as described in "Iris Close
Detection ON/OFF."
or