Canon CN8x15 Operation Manual page 131

(2) Specifying Remote Iris Gain
Although this value is factory-set, it can be adjusted as needed.
The same remote iris gain value applies to all users, regardless of the current user. Thus, there is no need to switch
users in advance. Unlike most other setting adjustments, any changes to this setting also apply to user 0.
Initial Top Screen
[ ]
1
MENU
[ Basic ] [Adj]
[ I-Gain ] [Trk]OFF
[I-Tq]H
Fr1P
A
Iris Screen
[ ]
Iris
[ I-Gain ]
Torque: High
Comp: ON
Screen A
[ ]
Iris
[ I-Gain ]
Torque: High
Comp: ON
[I-Gain] Screen
[ ]
Iris
[ I-Gain ]
Auto: 50
Remote: 90
[ ]
Iris
[ I-Gain ]
Auto: 50
52
Remote: 90
[ ]
Iris
[ I-Gain ]
Auto: 50
Remote: 93
Options
Description Minimum gain
Default value: 90
MENU
Top
1
Press
three times.
The display switches to the Iris screen.
Press
2
[I-Gain] is underlined.
3
Press
The display switches to the [I-Gain]
screen.
4
Press
[Remote] is underlined.
The previous or default value is highlighted.
5 Press
Press left or right until you reach the desired function.
6
Press
The display reverts to Screen A.
01 to
Maximum gain
Iris
× 3
once and
.
.
twice.
or .
.
99
[ ]
E129
4. Operation in Full Mode
Note: Do the following when
adjusting gain while checking
iris operation.
→ Confirm that the drive unit A/M
switch is set to [Auto] mode.
→ Set the camera iris mode to
[Remote].
Note: The current iris gain value
is retained even if you reset
other settings as described in
"4.2.1 Resetting Values." For
this reason, you will no longer
be able to view the default
setting. If necessary, make
a note of the default setting
before adjusting this value.
× 2 or