Canon CN8x15 Operation Manual page 106

4. Operation in Full Mode
Copying Settings Between Lenses
Setting information can be copied between information displays of drive units mounted on the display. You can copy
either settings for individual users or for all users. Copying requires a dedicated cable, sold separately. For details,
contact Canon or your dealer.
(1) Copying One User's Settings to Another Lens
Initial Top Screen
[ ]
1
MENU
[ Basic ] [Adj]
[ I-Gain ] [Trk]OFF
[I-Tq]H
Fr1P
A
User Screen
User 1
Mode:
Full
No.:
1
Name: --------
Screen A
User 1
Copy
ToOtherLens
Unlock
Access:
ToOtherLens Screen
1
User
ToOtherLens
Connect: y/n
1
User
ToOtherLens
Connect: y/n
Screen B
User 1
ToOtherLens
UserCopy : y/n
y/n
AllCopy :
Note: Required Preparation
1. Plug one end of the dedicated cable (20 pin–20 pin) into the source lens and the other
end into the 20-pin connector of the zoom/focus remote of the target lens.
2. Turn on the source and target lenses.
3. Press the Display switch on the source lens to turn on the display. (Leave the source
lens display off.)
1
Press .
The display switches to the User screen.
2
Press six times.
[ToOtherLens] is underlined.
3
Press .
The display switches to the ToOtherLens
screen.
4
Press .
[Connect] is underlined, and you can
select {y} (yes) or {n} (no).
5
Press and then
The display switches to Screen B.
6
Press .
E104
Important
First, switch to the user for whom
the settings apply.
(For instructions, see "4.1.3
Switching Users" or "4.2.1 User
Screen Settings: Switching
Users.")
Note: You can cancel copying and
restore the original values at
any time before pressing
in step 11. To return to the
previous screen, press up. To
cancel copying and turn off
the display, press the Display
switch.
.
Continued on next page