Canon CN8x15 Operation Manual page 134

4. Operation in Full Mode
Iris Close Detection ON/OFF
The iris cannot be fully closed when correction is active and an extender (1.5×) is used. As a countermeasure, you can
specify a function to detect iris close and close the iris as needed.
First, switch to the user for whom the settings apply.
(For instructions, see "4.1.3 Switching Users" or "4.2.1 User Screen Settings: Switching Users.")
Initial Top Screen
[ ]
1
MENU
[ Basic ] [Adj]
[ I-Gain ] [Trk]OFF
[I-Tq]H
Fr1P
A
Iris Screen
[ ]
Iris
[ I-Gain ]
Torque: High
Comp: ON
[ ]
Iris
Comp:
ON
Close:
OFF
OFF
Controller
[ ]
Iris
Comp:
ON
Close:
ON
OFF
Controller
Options
Description No close detection
(D): Default value
MENU
Important
1
Press
three times.
The display switches to the Iris screen.
2
Press four times.
[Close] is underlined.
The previous or default function is
highlighted.
3
Press
Press left or right to switch the function
{ON} or {OFF}.
(D)
OFF
Close detection
Iris
× 3
once and
or .
ON
[ ]
× 4
E132
Note: With some cameras, iris
compensation may conflict
with iris control by the
camera, preventing correct iris
operation. If so, deactivate iris
close detection.
*: Displayed when {Comp} is set to ON.
Note: Iris close is detected only
when iris compensation is
enabled.
or