Canon CN8x15 Operation Manual page 133

Iris Compensation ON/OFF
The amount of light decreases when an extender (1.5×) is used. Therefore, you can set a function that corrects the iris to
the open side so as to maintain the amount of light.
First, switch to the user for whom the settings apply.
(For instructions, see "4.1.3 Switching Users" or "4.2.1 User Screen Settings: Switching Users.")
Initial Top Screen
[ ]
1
MENU
[ Basic ] [Adj]
[ I-Gain ] [Trk]OFF
[I-Tq]H
Fr1P
A
Iris Screen
[ ]
Iris
[ I-Gain ]
Torque: High
Comp: ON
[ ]
Iris
Torque: High
Comp: ON
Close: OFF
[ ]
Iris
Torque: High
Comp: OFF
OFF
Controller
Options
Description Iris compensation
(D): Default value
MENU
Important
1
Press
The display switches to the Iris screen.
2
Press
[Comp] is underlined.
The previous or default function is
highlighted.
3 Press
Press left or right to switch the function
{ON} or {OFF}.
(D)
ON OFF
No iris compensation
Iris
× 3
once and three times.
three times.
or .
[ ]
× 3
E131
4. Operation in Full Mode
*: Displayed when {Comp} is set to ON.
*: Displayed when {Comp} is set to OFF.
Note: The iris may not fully close
in some cases when the iris
compensation is set to ON
while an extender (1.5×) is
used. If so, activate detection
as described in "Iris Close
Detection ON/OFF."
or