Canon CN8x15 Operation Manual page 152

4. Operation in Full Mode
Serial Communication with Camera ON/OFF
Two types of camera–lens interfaces are available: analog control or control via serial communication. This setting
enables you to switch between auto control detection and analog control.
By default, this setting is ON, enabling auto detection of whether serial or analog control is used.
To restrict the interface to analog control, set it to OFF.
Initial Top Screen
[ ]
1
MENU
[ Basic ] [Adj]
[ I-Gain ] [Trk]OFF
[I-Tq]H
Fr1P
A
Info Screen
Info
S/N
OFF
3D:
Encoder: OFF
Info
Encoder: OFF
ON
CamSeri:
I/Fprior Mount
Info
Encoder: OFF
CamSeri: OFF
I/Fprior
Mount
Options
Serial communication with the camera
Description
(D): Default value
MENU
1
Press once and
The display switches to the Info screen.
2
Press four times.
[CamSeri] is underlined.
3 Press or
Press left or right to switch the function {ON} or {OFF}.
(D)
ON
Serial communication with the camera
Enabled
Info
× 2
twice.
.
OFF
Disabled
× 4
E150
or