Canon CN8x15 Operation Manual page 122

4. Operation in Full Mode
Assigning Functions to the Seesaw
The zoom seesaw switch can be programmed to control either the {Zoom} or {Iris}.
First, switch to the user for whom the settings apply.
(For instructions, see "4.1.3 Switching Users" or "4.2.1 User Screen Settings: Switching Users.")
Initial Top Screen
[ ]
1
MENU
[ Basic ] [Adj]
[ I-Gain ] [Trk]OFF
[I-Tq]H
Fr1P
A
Switch Screen
1
Switch
Fr1P
AUX:
A
Shtl
AUX1:
A 1
Fr1P
AUX2:
A 2
1
Switch
RET: RET
R
A/M: Norm
AM
SSaw: Zoom
Switch 1
RET: RET
R
A/M: Norm
AM
SSaw: Iris
Options
Description Zoom operation
(D): Default value
MENU
1
Press
The display switches to the Switch screen.
2
Press
[SSaw] is underlined.
The previous or default function is highlighted.
3
Press
Press left or right until you reach
the desired function.
(D)
Zoom Iris
Iris operation
Switch
Top
Important
and then .
seven times.
or .
1
× 7
E120
Note: Note on Iris Assignment
1. The seesaw switch will no longer
control zooming.
2. To control the iris with the rocker
switch, you must set the iris mode
to manual.
Operation is not possible in Auto or
Remote mode.
3. Press the Telephoto side to open
the iris, or press the Wide end side
to close it.
4. Zoom speed control adjustments
also apply to iris control, and you
can specify the maximum iris
speed. (See "4.2.5 Zoom Screen
Settings: Specifying Maximum
Zoom Speed Control.")
or