Canon CN8x15 Operation Manual page 140

4. Operation in Full Mode
Specifying Zoom Mechanical End Stop Responsiveness
Specify final responsiveness at the mechanical end in zooming (using the seesaw switch, for example) as needed.
First, switch to the user for whom the settings apply.
(For instructions, see "4.1.3 Switching Users" or "4.2.1 User Screen Settings: Switching Users.")
Initial Top Screen
[ ]
1
MENU
[ Basic ] [Adj]
[ I-Gain ] [Trk]OFF
[I-Tq]H
Fr1P
A
Zoom Screen
[ ]
Zoom
Tracking: OFF
Movement
CurveMode
Screen A
[ ]
Zoom
Tracking:
OFF
Movement
CurveMode
Movement Screen
[ ]
Zoom
Movement
Start: 99
Stop: 91
[ ]
Zoom
Movement
Stop: 91
End: D99
[ ]
Zoom
Movement
Stop: 91
End: 97
Options 00
Description Stop gradually
(D): Default value
MENU
Important
1
Press
The display switches to the Zoom screen.
2
Press
[Movement] is underlined.
3
Press .
The display switches to the Movement screen.
4
Press
[End] is underlined.
The previous or default value is highlighted.
5 Press
Press left or right until you reach the desired function.
6
Press .
The display reverts to Screen A.
(D)
to 99
Stop quickly
[ ]
Zoom
× 4
once and four times.
twice.
three times.
or .
× 2
E138
× 3 or