Canon CN8x15 Operation Manual page 154

4. Operation in Full Mode
Specifying the
When Technology is used (only when a PL mount camera is attached), it is possible to specify the initial setting for the unit (feet
or meters) used to express distances in information sent to the camera. Accordingly, information sent for the actual subject distance,
hyperfocal distance, subject distance at close range and infinity, and entrance pupil position is expressed in the specified unit.
Any distance unit set on the camera takes precedence.
Initial Top Screen
[ ]
1
MENU
[ Basic ] [Adj]
[ I-Gain ] [Trk]OFF
[I-Tq]H
Fr1P
A
Info Screen
Info
S/N
3D: OFF
Encoder: OFF
Info
I/Fprior Mount
/ i
State:
Info
/ i
Units: Feet
Info
/ i
Units:
Feet
Info
/ i
Meters
Units:
Options
Description Expressed in feet
(D): Default value
MENU
Technology Distance Unit
1
Press
The display switches to the Info screen.
2
Press
[/ i] is underlined.
3
Press
4
Press
[Units] is underlined.
The previous or default value is highlighted.
5
Press
Press left or right to switch the function {Feet} or {Meters}.
(D)
Feet Meters
Expressed in meters
Info
× 2
Note
once and twice.
six times.
.
.
or .
× 6
E152
is trademark of Cooke Optics Limited.
or