Table of Contents
Advertisement
WinMPM Operations:
Step 7:
Step 8:
Step 9:
User Guide
Once the F1. EDIT is pressed, the Saddle - Single Intersection diagram displays, input the
parameters of the saddle cut.
For this example, a 45 degree saddle on 3" Schedule 40 pipe is being programmed. Note
that as parameters are entered under the End 1 Saddle Cut Data section, the short
description underneath will update to match.
With the saddle cut completed, the programing is finished. Press the F10. Return button.
This will return you to the new pipe data screen.
To generate the G- CODE for the machine, press F7. Calculate button.
Page 22
Advertisement
Table of Contents
