Table of Contents
Advertisement
Job Group:
Process Stations:
Configure and control the tool outputs on the machine.
•
Kerf - Add a Kerf value to compinsate for the tool kerf
value.
•
Set Offset - Capture the distance based on the torch
position to a Plate Origin.
•
On/Off Dwell - Add time delay to sending signals to the
associated tool.
•
Pierce Count - Counts the processes ARC ON commands.
•
Activate - Toggles the tool to get a ON command.
Toggle to turn off.
•
State - Indicates the ON/OFF status of the tool.
Log On:
LOG ON switches users of the VMD software.
•
ADMIN - Opens the MACHINE SETTINGS (password protected).
•
OPERATOR - Displays the standard user with the standard
interface.
•
PRODUCTION OPERATOR (default) - Standard user with a
simplified interface.
•
TECH SUPPORT - Used only for tech support (password
protected).
Shutdown:
SHUTDOWN will close the VMD and power down the computer.
This should be used when shutting down the system.
•
Prompts a dialog box to TURN OFF ACCUMOVE CONTROLLER.
•
Press the E-Stop button to power down the controller.
•
The computer will then shut down.
•
Turn the power switch to OFF.
Vernon Tool MasterPipe Compact Profiler
Page 11
Advertisement
Table of Contents
