Lincoln Electric Vernon Tool MasterPipe Compact Profiler Operator's Manual page 24

Jogging allows the user to move the head by pressing on the direction. The Jogging group has several types of jogs that can be
executed, allowing the user finite control over the direction, distance, and speed the head will move.
Jog:
The JOG keys are assigned to the movement of torch to the origin of the
operators console. By pressing more towards the center of the arrow, the
torch body will move slower. Pressing more towards the outside of the
arrow, the torch body will move faster. Continuous will move as long as your
finger is active on the direction.
FEED RATE OVERRIDE - Alter the running feedrate of the job that is active.
The feedrate updates the change on the next ARC ON command.
Incremental Jog:
Pressing a direction will travel the torch the assigned Incremental Distance
Using the slider will give you increments between .000 - .100. Directly enter
any number into the dialog.
Point Jog:
Allows the user to define the position the torch to travel to, an origin, and a
set feedrate.
• CUT TO POSITION - Process a ARC ON signal and move the torch to
the postion and feedrate defined.
• MOVE TO POSTION - Moves the torch to the defined position and
feedrate defined.
Vernon Tool MasterPipe Compact Profiler
Jogging
Page 15