The Run group controls the startup of the machine along with running jobs.
Datum:
Datum has several features. When first starting up your machine, datum will power
your motors and move the machine to establish its MACHINE ZERO.
When pressing DATUM, the Z-AXIS will travel to it's top zero point.
Run Job:
•
Run Job - Starts the job that is loaded into the VMD.
•
Stop - Stops any activity or motion of the machine.
Reset:
The resets the job to start over. If the job has started and not completed you will need
to RESET to start the job over.
Active Run/Dry Run:
Toggles between ACTIVE RUN and DRY RUN.
•
ACTIVE RUN - Activates your torch to fire when you RUN a job.
•
DRY RUN - Deactivates your torch from operation. If in DRY RUN, the torch
will simulate all movements without firing the torch.
User Guide
Run Group
Page 14