Table of Contents
Advertisement
The Job Group covers any "job" type functions. This group directly deals with selecting a job, creating a job (Shape Library),
Nesting, and other Job type functions.
Select Job:
Allows the operator to choose the job which they would like to load.
The SELECT JOB folder shows the "HOT FOLDER" and the loaded
jobs in that folder.
*C:\ControllerData\Jobs is the HOT FOLDER.
To select another source, press BROWSE and that will open the
standard WINDOWS dialog.
The PREVIEW window will display the selected job from the list.
IS JOB KERF COMPENSATED: Toggles the software to
accommodate for KERF. If generating parts from TMCAD/VMD
NEST, select YES. Shape Library parts require KERF correction,
select NO. Uses the KERF diameter setting in TOOL LIBRARY.
Nesting:
Launches the VMD Nesting program.
Flat Plate operation only.
Shape Library:
Feature opens the dialog to create a user-defined shape based on 36 of the most common
parts.
Flat Plate operation only.
Plate Setup:
The options in Plate Setup allows you to make alterations to the job
itself and set the machine up for material.
•
ROW AND COLUMN - Flat Plate operation only.
•
TRANSFORMS - Flat Plate operation only.
•
MATERIAL SENSING - Works in conjunction with the CUT
PARAMETERS by setting a measurement for the TOP OF
MATERIAL and the MATERIAL THICKNESS of the plate you are
cutting. This setting is only utilized when cutting with IHS
disabled.
•
PIPE - User enters the outer pipe diameter being cut.
•
PLATE ALIGNMENT -Flat Plate operation only.
•
SET PLATE ORIGIN - Establishes the PLATE ORIGIN.
•
GO TO PLATE ORIGIN - Moves the head back to the PLATE
ORIGIN.
User Guide
Job Group
Page 10
Advertisement
Table of Contents
