NU-AP699E9N3 Wireless Router User Manual
For details of parameter settings for this page, refer to previous parameter
descriptions for PPTP.
8.4.3 DHCP Server
Choose Network Settings > DHCP Server and the DHCP Server page is
displayed.
DHCP refers to Dynamic Host Configuration Protocol. If Use Device as DHCP
Service is selected, NU-AP699E9N3 automatically assigns IP addresses to
comupters in the LAN. Users do not need to configure TCP/IP protocol paramters
such as the IP address, the subnet mask, the gateway, and the DNS server
information for computers connected to the router's LAN.
57