Table of Contents
Advertisement
NU-AP699E9N3 Wireless Router User Manual
Dial On Demand: If you select it, the system automatically establishes
–
a connection when a network access request from the LAN is received.
If no network access request is sent from the LAN within the specified
time of Idle Timeout, the system automatically interrupts the
connection. If you pay for Internet access by time, you are
recommended to use this connection mode, which effectively saves the
expense of Internet access.
Manually Connect: If you select it, you need to manually set dialup
–
connection after startup.
Idle Timeout: If the system does not detect any Internet access behavior
within the specified time of Idle Timeout, the system interrupts the Internet
connection.
My IP Address: Enter your IP address. You can also leave this field blank.
Subnet Mask: Enter the subnet mask. You can also leave this field blank.
Sever Address: Enter the IP address of the server. You can also leave this
field blank.
Gateway IP Address: Enter the IP address of the gateway. You can also
leave this field blank.
Domain Name Server (DNS) Address: Select Use These DNS Servers if
you know that your ISP does not automatically transmit DNS addresses to
the router during login. And enter the IP address of your ISP's primary DNS
server. Enter a secondary DNS server address if available.
MTU Size: Set the maximum transmission unit. The default value is
recommended.
Router MAC Address: See descriptions on setting Router MAC Address
for DHCP.
After finishing settings, click Apply to save the settings.
(5) L2TP
If the ISP provides the user name and password for L2TP dialup, select L2TP.
56
Advertisement
Table of Contents
