NU-AP699E9N3 Wireless Router User Manual
10.4.2 DHCP Server
Choose Network Settings > DHCP Server and the DHCP Server page is
displayed.
DHCP refers to Dynamic Host Configuration Protocol. If Use Device as DHCP
Service is selected, NU-AP699E9N3 automatically assigns IP addresses to
comupters in the LAN. Users do not need to configure TCP/IP protocol paramters
such as the IP address, the subnet mask, the gateway, and the DNS server
information for computers connected to the router's LAN.
10.4.2.1 Using the Router as a DHCP Server
Use Router as DHCP Server: If you select the Use Router as DHCP
Server check box, NU-AP699E9N3 serves as a DHCP server to
automatically assign IP addresses to computers connected to it.
Starting IP Address/Ending IP Address: Set the starting and ending IP
addresses to specify a pool of IP addresses to be assigned by the DHCP
server. After you set Starting IP Address/Ending IP Address, hosts in the
LAN obtain IP addresses that are in the range of the starting and ending IP
addresses.
117