ZyXEL Communications NU-AP699E9N3 User Manual page 72

Table of Contents

Advertisement

NU-AP699E9N3 Wireless Router User Manual
Automatic: If selected, the router uses an authentication type of Open
or Shared keys according to the request of the host.
Open: If selected, hosts in the wireless network can pass the
authentication and connect to the wireless network without using a
password. However, the password is required if you want to transmit
data.
Shared keys: If selected, hosts in the wireless network can pass
authentication only when the correct password is entered. Otherwise,
the hosts cannot connect to the wireless network.
Encryption Type: The type of the key to be set. Hexadecimal and ASCII
code are available.
Hex: Valid characters for keys contain 0–9 and A–F.
ASCII: Valid characters for keys contain all characters of the key board.
Encryption Strength: The encryption strength determines the length of the
key.
If Encryption Strength is set to 64 bits, set the key to 10 hexadecimal
digits or 5 ASCII characters.
If Encryption Strength is set to 128 bits, set the key to 26 hexadecimal
digits or 13 ASCII characters.
Key 1/2/3/4: Set the key based on the selected encryption type and
encryption strength.
-
WPA-PSK[TKIP] or WPA2-PSK[TKIP]
WPA-PSK: Preshared key Wi-Fi protection access
WPA2-PSK: Preshared key Wi-Fi protection access version 2
TKIP: Temporal Key Integrity Protocol
Note that the 802.11n mode does not support the TKIP algorithm.
PassPhrase: Enter 8-63 ASCII characters or 64 hexadecimal digits.
63

Advertisement

Table of Contents
loading

Table of Contents