Table of Contents
Advertisement
NU-AP699E9N3 Wireless Router User Manual
Click Add to add a static routing rule.
Active: The static routing rule can take effect only if the Active check box is
selected.
Route Name: Enter the name of the static route.
Destination IP Address: The destination address or network that you want
to access. This IP address cannot be in the same network segment as the IP
address of the WAN or LAN interface of NU-AP699E9N3.
IP Subnet Mask: This IP subnet mask together with the destination IP
address identify the target network.
Gateway IP Address: The IP address of the next node to which packets are
sent. The gateway IP address must be in the same network segment as the
IP address of the WAN or LAN interface of NU-AP699E9N3.
Metric: The number of other routers in the user network. The value ranges
from 2 to 15. Usually, the value of 2 or 3 leads to the best performance. If the
route is direct connection, set Metric to 2.
After finishing settings, click Apply to save the settings.
81
Advertisement
Table of Contents
