ZyXEL Communications NU-AP699E9N3 User Manual page 38

NU-AP699E9N3 Wireless Router User Manual
Region: Select the region where you are located.
Enable SSID Broadcast: If enabled, the router broadcasts its SSID in the
wireless network. Wireless clients can scan the SSID and access the
wireless network under the SSID.
Enable Wireless Isolation: If selected, wireless clients connected to the
network of the same SSID can access the Internet only, but cannot
communicate with each other.
Name (SSID): Set the name for the wireless network. The SSID can contain
up to 32 characters and can be letters, numerals, underlines, and any
combinations of them. The SSID is case-sensitive.
Mode: Select the wireless mode. Mixed 802.11b/g/n is recommended.
Channel: The channel for transmitting wireless signals. The default channel
is Auto. When you select Auto, NU-AP699E9N3 automatically selects the
best channel from the available channels according to actual situations.
Band Width: The bandwidth occupied for wireless signal transmission.
29