Table of Contents
Advertisement
NU-AP699E9N3 Wireless Router User Manual
Step 2
Click Setup Wizard in the navigation bar on the left pane of the page.
Select WDS Mode and click Next. (Note: The WDS function cannot be
used if the channel is set to Auto) Manually set all WDS devices to the
same channel.
Step 3
Set the IP address of the LAN port of the repeater and enter the MAC
address of the basic station. Click Next.
Step 4
Set the SSID, channel, and security encryption for the repeater. The
channel cannot be set to Auto. It is recommended to configure the
repeater with the same security option as its base station. Set the
encryption password and note it down. Click Finish to complete the
settings.
18
Advertisement
Table of Contents
