ZyXEL Communications NU-AP699E9N3 User Manual page 29

NU-AP699E9N3 Wireless Router User Manual
router, we can use WDS to connect the three routers to provide perfect wireless
coverage for the whole areas.
Configure the three routers in this way:
Wireless router B functions as the wireless basic station; wireless routers A and C
connect to wireless router B by using WDS.
(1) Configuring wireless router B as the wireless basic station
Step 1 Log in to the Web management page of wireless router B. Choose
Wireless Settings > Wireless Basic Settings and set the SSID,
channel, and wireless encryption information. Write down the SSID,
channel, and wireless encryption information that are required when you
are configuring wirelss router A and C.
Step 2 Choose Wireless Settings > WDS Function and enable the WDS
function. Enter MAC addresses of repeaters (that is, wireless routers A
and C in this example). Click Apply to save the settings.
(2) Configuring wireless router A
Do as follows to establish WDS connection between wireless routers A and B:
Step 1 Set wireless router A with the same channel and encryption information
as wireless router B.
Step 2 Choose Wireless Settings > WDS Function and enable the WDS
function. Set the IP address of wireless router B different from that of
wireless router B to avoid IP address conflict (for example, change the IP
address to 192.168.100.20 in the LAN Interface Settings page and log
20